100 M4 X 10 Torx Pin Button Head Screws With Button Head Barrel Nuts Stainless

100 M4 X 10 Torx Pin Button Head Screws With Button Head Barrel Nuts Stainless
100 M4 X 10 Torx Pin Button Head Screws With Button Head Barrel Nuts Stainless
100 M4 X 10 Torx Pin Button Head Screws With Button Head Barrel Nuts Stainless

100 M4 X 10 Torx Pin Button Head Screws With Button Head Barrel Nuts Stainless

TORX PIN BUTTON HEAD SCREWS M4 X 10. TORX PIN BUTTON HEAD BARREL NUTS M4 X 9. YOU WILL RECEIVE 100 OF EACH PART. (ONLY 1 OF EACH PART SHOWN IN PHOTO FOR CLARITY). THESE ARE VERY HIGH QUALITY SCREWS & BARREL NUTS.

THESE ARE IDEAL TO SECURE AN. OVERALL THICKNESS OF 14 - 15mm. THIS ALLOWS FOR A MINIMUM OF 4mm LENGTH OF. IF WASHERS ARE USED (NOT SUPPLIED) UNDER ONE OR BOTH HEADS OBVIOUSLY. YOU WILL BE ABLE TO USE ON THINNER MATERIALS. OR IF NECESSARY YOU COULD CUT BACK THE FULLY THREADED SCREWS. TX20 PIN DRIVE BITS FOR BOTH THE SCREW AND NUT WILL BE REQUIRED. M4 ARE REQUIRED FOR THE SCREW &. M5 ARE SUITABLE FOR THE BARREL NUT. IF YOU NEED TO SPREAD THE LOAD.

SQUARE SECTION SPRING WASHERS ALSO AVAILABLE. 6mm DIAMETER CLEARANCE HOLE REQUIRED FOR BARREL NUT.

This item is in the category "Business, Office & Industrial\Fasteners & Hardware\Other Fasteners & Hardware". The seller is "inoxca" and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
100 M4 X 10 Torx Pin Button Head Screws With Button Head Barrel Nuts Stainless


Homepage  Archives  Contact  Privacy Policy Agreement  Terms of Use