12 M10 X 80 Torx Pin Button Head Screw With Barrel Nut A2 Stainless + 2 Bits T45
TORX PIN BUTTON HEAD SCREWS M10 X 80. TORX PIN BUTTON HEAD BARREL NUTS M10 X 20. YOU WILL RECEIVE THE FOLLOWING. 2 DRIVE BITS IN CHROME VANADIUM CR-V STEEL.
(ONLY 1 OF EACH PART SHOWN IN PHOTO FOR CLARITY). THESE ARE VERY HIGH QUALITY SCREWS & BARREL NUTS.
THESE ARE DESIGNED TO SECURE AN. OVERALL THICKNESS OF BETWEEN 88 - 90mm. THIS ALLOWS FOR A MINIMUM OF 10mm LENGTH OF.
IF WASHERS ARE USED (NOT SUPPLIED) UNDER ONE OR BOTH HEADS OBVIOUSLY. YOU WILL BE ABLE TO USE ON THINNER MATERIALS. OR IF NECESSARY YOU COULD CUT BACK THE FULLY THREADED SCREWS. TX45 PIN DRIVE BITS FOR BOTH THE SCREW AND NUT WILL BE SUPPLIED. M10 ARE REQUIRED FOR THE SCREW &.
M12 WOULD BE SUITABLE FOR THE BARREL NUT. IF YOU NEED TO SPREAD THE LOAD. SQUARE SECTION SPRING WASHERS ALSO AVAILABLE. 13mm DIAMETER CLEARANCE HOLE REQUIRED FOR BARREL NUT. This item is in the category "Home, Furniture & DIY\DIY Materials\Nails, Screws & Fasteners\Nuts".
The seller is "inoxca" and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.- Model: M10 BARREL NUTS + SCREWS + DRIVE BITS
- Head Style: BUTTON HEAD TORX PIN
- Thread Size: M10
- Drive Style: TORX PIN T45 TX45 TT45
- Material: Stainless Steel A2
- Unit Quantity: 12 + 12 + 2
- Grade: A2 304 STAINLESS STEEL
- Type: Barrel Nuts & Screws Button Head Stainless Steel A
- Number in Pack: 12 BARREL NUTS + 12 SCREWS + 2 DRIVE BITS
- System of Measurement: METRIC
- Finish: Stainless Steel
- Brand: Supplied by inoxca UK